WakeBox Wake on LAN for iPhone & iPad

支持与帮助

最后更新:2026-11-17

唤醒失败?Wake-on-LAN 需要目标设备、路由器和手机三端同时满足条件。多数问题出在目标电脑的 BIOS 设置或路由器的广播限制上。

01点了唤醒,电脑没有反应

按顺序检查:

  • 目标电脑已在 BIOS / UEFI 中开启 Wake-on-LAN,并在系统网卡设置中允许「魔术包唤醒」。
  • 使用有线网卡。多数笔记本在 Wi-Fi 下不支持关机唤醒。
  • 手机与目标设备处于同一局域网,且路由器未开启「AP 隔离 / 客户端隔离」。
  • 广播地址尝试 255.255.255.255 或你所在网段的定向广播,例如 192.168.1.255。
  • 端口先试 9,不行再试 7 或 2304。
  • MAC 地址需为目标设备有线网卡的地址,格式如 A4:83:E7:2C:19:5B。

应用显示「已发送」表示广播包已从手机发出;目标设备是否开机取决于上述设置,协议本身没有回执。

02提示发送失败或 Operation not permitted

通常是本地网络权限被拒绝,或当前网络禁止广播:

  • 打开「设置 → WakeBox → 本地网络」,确认已开启。
  • 关闭 VPN、代理或企业网络策略后重试。
  • 部分公共 Wi-Fi 与酒店网络禁止 UDP 广播,请换到家庭网络测试。

03如何查看设备的 MAC 地址

Windows:ipconfig /all,查看有线网卡的「物理地址」。macOS:系统设置 → 网络 → 以太网 → 详细信息 → 硬件。NAS 与主板通常在管理后台或机身标签上标注。

04定时唤醒不准时

iOS 的后台刷新由系统调度,可能延后数分钟甚至跳过。如需精确时间,请在「快捷指令」中创建个人自动化,添加「打开 URL」动作,填入应用内提供的 wakeup://wake?id=... 链接。

05小组件不显示设备

  • 小组件是 Pro 功能,请先确认已解锁。
  • 在应用内添加至少一台设备,然后回到桌面长按小组件选择「编辑小组件」。
  • 仍不显示时,删除小组件后重新添加。

06更换设备后如何恢复 Pro

使用购买时的同一 Apple ID 登录,在付费墙或「设置」中点击「恢复购买」。无需重复付费,也不会自动续费。

07数据会上传吗

不会。设备、MAC 地址与唤醒记录仅保存在本机,卸载即删除。详见隐私政策。

08联系我们

如果以上步骤仍未解决,请邮件说明:设备型号、iOS 版本、目标设备系统、路由器型号、应用内的错误提示。

邮箱:281431280@qq.com(通常在 2 个工作日内回复)

Wake-up not working? Wake-on-LAN needs the target device, the router and the phone to be configured correctly. Most failures come from the target's BIOS settings or from broadcast blocking on the router.

01The device does not wake up

Check these in order:

  • Wake-on-LAN is enabled in the target's BIOS / UEFI, and the network adapter allows magic-packet wake.
  • Use a wired Ethernet adapter. Most laptops cannot wake from power-off over Wi-Fi.
  • Phone and target are on the same LAN, and the router has no AP isolation or client isolation enabled.
  • Try the broadcast address 255.255.255.255, or a subnet broadcast such as 192.168.1.255.
  • Try port 9 first, then 7 or 2304.
  • Use the MAC address of the wired adapter, for example A4:83:E7:2C:19:5B.

"Packet sent" means the broadcast left your phone. Whether the target powers on depends on the settings above; the protocol has no acknowledgement.

02Send failed or "Operation not permitted"

Usually the Local Network permission was denied, or the network blocks broadcasts:

  • Open Settings → WakeBox → Local Network and allow access.
  • Turn off VPN, proxies or corporate network policies and try again.
  • Many public and hotel Wi-Fi networks block UDP broadcasts. Test on a home network.

03How to find the MAC address

Windows: run ipconfig /all and read the Physical Address of the Ethernet adapter. macOS: System Settings → Network → Ethernet → Details → Hardware. NAS and motherboards usually show it in their admin panel or on a label.

04Scheduled wake is not on time

iOS schedules background refresh itself and may delay or skip it. For precise timing, create a Shortcuts personal automation, add the Open URL action and paste the wakeup://wake?id=... link shown in the app.

05The widget shows no devices

  • Widgets are a Pro feature; make sure Pro is unlocked.
  • Add at least one device in the app, then touch and hold the widget and choose Edit Widget.
  • If it still does not update, remove the widget and add it again.

06Restoring Pro on a new device

Sign in with the same Apple ID used for the purchase, then tap Restore Purchases on the paywall or in Settings. You will not be charged twice, and there is no auto-renewal.

07Is my data uploaded

No. Devices, MAC addresses and wake history stay on your device and are removed when you uninstall. See the Privacy Policy.

08Contact

If the steps above do not help, email us with: device model, iOS version, target OS, router model and the error message shown in the app.

Email: 281431280@qq.com (usually within 2 business days)